Epoxy-based UV-resistant stone binder.
STONEPOX UV - 2K is a two-component UV-resistant, epoxy resin-based decorative stone
binder.
General Characteristics
Excellent adhesion, resistant to chemicals, UV resistant, does not fade.
| Color | Transparent Colorless |
|---|---|
| Density | 1,07 g/cm³ |
| Viscosity | 1200 Mpass |
| Application Temperature | 10°C - 30°C |
| Mechanical Strength | 4 - 8 Hour |
STONEPOX UV - 2K is an ideal product for use as a stone binder on hard surfaces in floor coatings, parks, offices, homes, and gardens, as well as for walkways and bike paths.
Component A: 14 kg can Component B: 7 kg can 21 kg set It should be stored in its unopened original packaging, in a cool and dry environment, protected from frost. The appropriate storage temperature should be between +5°C and +25°C. The shelf life, under suitable storage conditions, is 12 months from the production date.
During application and mixing, contact of the material with skin and eyes should be avoided. In case of contact, rinse immediately with plenty of water. If contact with eyes occurs, wash immediately with plenty of water and seek medical attention. Gloves, protective clothing, mask, and goggles should be worn during use.
Application: First, components A and B are mixed separately. Then, the components are combined and mixed thoroughly. Once the mixture is properly blended, the calculated amount of aggregate is added and mixed using a mixer. After achieving a well-mixed mixture of aggregate and STONEPOX UV 2K, it is ready for application. It is important to ensure that the surface has cured and is solid. The surface should be free from any residues that could prevent adhesion. For better results, the surface should be primed with NANOPOX PRIMER SF/D before application. No additives other than those specified in the application instructions should be added.