Two-component aliphatic paint based on polyurethane with UV resistance.
NP - PUR 850 is a two-component, solvent-based, semi-gloss topcoat floor paint based on
aliphatic polyurethane with high UV resistance. It is water-resistant,
chemical-resistant, impact and abrasion-resistant, easy to clean, hygienic, and suitable
for both interior and exterior applications.
General Characteristics
Elastic and hard, durable, Excellent UV resistance and yellowing
resistance, Easy to clean, Wide range of colors, Good chemical
resistance, High scraping resistance.
| Gloss | Glossy |
|---|---|
| Color | RAL Colors |
| Density | 1,2 - 1,3 g/cm3 |
| Mixing Ratio | 9:1 |
| Solids Content | %75 |
| Flash Point | > 21°C |
Used in locations desired to have high color and gloss resistance such as factories, workshops, garages, warehouses, markets, schools, shopping malls, showrooms, production facilities, aircraft hangars, water treatment facilities. It is used in indoor and outdoor sports areas covered with polyurethane.
Component A: 15 kg Can Component B: 5 kg Can / (A+B) Set: 20 kg Set Should be stored in its original unopened packaging, in a cool and dry environment, protected from frost. Suitable storage temperature should be between +5°C and +25°C. Shelf life is 12 months from date of manufacture under appropriate storage conditions.
During application and mixing, the material should be prevented from contact with the skin and eyes, and it should be washed with plenty of water and in case of contact. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. Gloves, protective clothing / masks / goggles should be used during use.
Application: If applied over polyurethane-based or epoxy coatings, it should be done within 24 hours of the curing of the underlying material. If the 24-hour period is exceeded, the surface must be sanded or roughened using mechanical methods. NP-PUR 850 Aliphatic Topcoat Paint is packaged in two separate metal cans. First, the ‘Base Material’ is mixed thoroughly within its own can, then the entire contents of the hardener in the smaller can are added to the base material. The mixture is stirred until a homogeneous blend is achieved without trapping air. The mixing process should be done with an electric mixer. The mixed product has a working time of 30-45 minutes, depending on humidity and temperature. Application can be done using a brush, roller, paint sprayer, or airless machine. The applied surface should be protected from water for 18-24 hours. For applications with two coats, an 18-24 hour waiting period is required between coats.