It is an acrylic-based, single-component, solvent-based, air-drying road line and
marking paint with high resistance to atmospheric
corrosion, UV, and water.
It is an acrylic-based, single-component, solvent-based, air-drying road line and
marking paint with high resistance to atmospheric corrosion, UV, and
water
General Characteristics
It has high flexibility, excellent adhesion, and abrasion resistance. It
features fast drying properties.
| Number of Components | 1 |
|---|---|
| Mix Density (g/cm³, 20°C) (TS EN ISO 2811-1) | 1,30 ± 0,10 |
| Mixing Viscosity (mPas, 25°C) (EN ISO 3219) | 1,30 ± 0,10 |
| Touch Dry (Minutes) | 30 - 60 |
| Recoat Time (Minutes) | 60 - 90 |
| Full Cure (Weeks) | 1 |
It can be easily applied with a roller, brush, or spray on all types of asphalt, concrete, epoxy, and/or polyurethane coated surfaces. It is developed for marking lines on roads, airports, sidewalks, pedestrian crossings, tennis courts, basketball courts, and other areas.
It is available in 20 kg packaging. A coverage of approximately 50 μm dry film thickness is achieved with a consumption of 0.150-0.200 kg/m² per coat.
The product should be kept away from skin and eyes. In case of contact, wash thoroughly with plenty of water and seek medical attention. Protective gloves, clothing, and goggles should be worn, and it should be kept out of reach of children. It is flammable and should not be approached with an open flame.
The surfaces to be applied must be free from oil, rust, dust, and other contaminants. There should be no moisture on the surface, and no loose layer should remain. Acrylic Topcoat Paint NANO SOLID - 525 UV is applied with a brush, roller, or spray gun on cleaned and prepped concrete, asphalt, epoxy, and/or polyurethane coated surfaces.