Two-component, epoxy-based, epoxy topcoat paint.
EPOSELF - C is a two-component epoxy paint designed for industrial floors, offering an
easy application and smooth surface finish. It is used as a
topcoat to achieve a slip-resistant surface.
General Characteristics
Excellent adhesion. Resistant to chemicals. Wear-resistant. Leadfree High mechanical
strength. Impermeable to liquid to a certain rate.
Glossy surface finish. Easy-to-apply. Easy to clean and maintain. Antislip surface can
be obtained.
| Brightness | Bright |
|---|---|
| Color | RAL Colors |
| Density | 1,2 - 1,3 g/cm3 |
| Mixture Ratio | 6:1 |
| Initial Curing | 18 Hours |
| Mechanical Curing | 24 Hours |
Used on concrete and cement-based surfaces, In warehouses, In production areas, Shopping malls, As top coat in epoxy coating systems, In exhibition and fair areas, As a top coat paint material in parking lots.
Component A: 18 kg Can - Component B: 3 kg Can (A+B) Set: 21 kg set Should be stored in its original unopened packaging, in a cool and dry environment, protected from frost. Suitable storage temperature should be between +5°C and +25°C. Shelf life is 12 months from date of manufacture under- appropriate storage conditions.
During application and mixing, the material should be prevented from contact with the skin and eyes, and it should be washed with plenty of water and in case of contact. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. Gloves, protective clothing / masks / goggles should be used during use.
Application: The surface should be cleaned of oils, waxes, grease, water repellents, loose particles, and dust that may weaken adhesion forces using a floor grinder. New concrete must be at least 28 days old. Cracks and damaged areas in the concrete should be repaired using suitable products like POX MORTAR 525. The surface must be primed with appropriate epoxy-based primers before application. The surface should be roughened using suitable mechanical methods before the primer layer. EPOSELF - C Aliphatic Topcoat Paint is packaged in two separate metal cans. First, the ‘Base Material’ is mixed thoroughly within its own can, then the entire contents of the hardener in the smaller can are added to the base material. The mixture is stirred until a homogeneous blend is achieved without trapping air. The mixing process should be done with an electric mixer. The mixed product has a working time of 30-45 minutes, depending on humidity and temperature. Application can be done using a brush, roller, paint sprayer, or airless machine. The applied surface should be protected from water for 18-24 hours. For applications with two coats, an 18-24 hour waiting period is required between coats.