A product that provides dustproofing and strength to concrete.
It is a single-component, acrylic polyurethane-based product with high penetration
properties, offering a transparent wet look. This concrete protection
system provides dustproofing and high mechanical strength on the surface.
General Characteristics
It is ready to use, easy to apply, and has high penetration ability. It is
resistant to harsh weather conditions and harmful UV rays from the sun.
Since it is modified with silane and siloxane, it creates a waterproof
surface on the applied surface. It is protective against alkaline and
acidic stain-causing products. It creates a hard and durable surface,
preventing surface wear. It gives a decorative and aesthetic appearance
to the surfaces. A slight wet appearance forms on the surface after
application. It prevents concrete surfaces from retaining dirt and creates
easy-to-clean, shiny surfaces. It has no adverse effects on the physical
properties of the applied surfaces. Once applied, it is a protective
product that is not affected by heavy or light load traffic, forklifts, or pallet
trucks.
| Color | Transparent |
|---|---|
| Appearance | Glossy |
| Thinner | Ready to use |
| Density | 0,95 gr/cm3 |
| Consumption | Consumption depends on the surface’s porosity and absorption, ranging from 100 gr - 250 gr/m² per coat. |
| Packaging | 4kg, 15kg tin cans |
|---|---|
| Application Methods | Brush, roller, spray gun (hollow or airless) |
| Application Temperature | +5°C / +30°C |
| Shelf Life | 1-year shelf life |
| Full Drying | 24 hours drying time |
| Equipment Cleaning | Cellulosic thinner |
It is used on all types of old, crumbly, and dusty concrete surfaces, newly poured concrete surfaces that have completed a 28-day curing period, polished or unpolished concrete surfaces. It is also used on concrete surfaces with capillary shrinkage cracks, in factory production areas, outdoor concrete surfaces, closed and open parking areas, and in all areas with concrete surfaces. It helps protect cement-based surface coatings and extend their service life.
During application, work clothing, protective gloves, goggles, and masks must be used in accordance with Occupational Health and Safety regulations. Due to the irritating effects of cement-based materials, contact with skin and eyes should be avoided during storage and application. In case of contact, immediately wash with plenty of water and soap. If ingested, seek medical attention immediately. Food and drink should not be allowed in the application areas. It should be stored in places out of reach of children.
The surface to be applied must be cleaned of oil, dirt, rust, dust, and any residues. On old and new concrete surfaces, if necessary, a surface polishing application with special diamond tools and polishing pads may be required. The product is ready for use. On highly porous and textured surfaces, at least two coats should be applied. There should be at least a 1-hour interval between the application of each coat. To test the full performance of the product, wait at least 24 hours.