A protective and glossy transparent material for stamped concrete and natural stone
surfaces.
NANO CL PX -1000 is a solvent-based acrylic resin-based protective and polishing
material used for the protection and polishing of all types of
surfaces with stamped concrete. It penetrates the pores of the concrete and aggregate
structure, providing long-lasting protection, dust resistance,
surface durability, and an aesthetic appearance.
Areas Of Use
It is used on all types of concrete surfaces, surfaces with applied surface
hardeners, stamped concrete surfaces, natural stone surfaces such as
travertine, marble, cotto, pressed brick, etc., cement-based precast
facade claddings, all types of raw concrete surfaces, artistic structures,
and in museums and gallery halls.
| Material Structure | Solvent-based Acrylic Resin |
|---|---|
| Color | Transparent |
| Density | 0.92 kg/litre |
| Flash Point | +25 °C |
| Drying Time | 2 Hours |
|---|---|
| Application Surface Temperature | (+5°C) ile (+25°C) arası |
| Service Temperature | (-20°C) ile (+80°C) arası |
| NOTE: The values above are at +23°C and 50% relative humidity |
Under proper storage conditions, it is valid for 2 years from the production date. Opened containers should be tightly sealed and stored under appropriate conditions, and used within 1 week.
In a three-layer application, the consumption is 0.2 - 0.25 liters per square meter. 30 kg bucket.
During application, work clothing, protective gloves, goggles, and a mask should be worn in accordance with occupational health and safety regulations. Due to the irritating effects of uncured materials, the components should not come into contact with the skin or eyes. In case of contact, immediately wash with plenty of water and soap, and seek medical attention if swallowed. The application areas should be ventilated, and food and drinks should not be brought into the application areas.
NANO CL PX-1000 / NANO PX-1000 is applied in 2 or 3 coats to a dry, moisture-free surface using a brush, roller, or solvent-resistant spray pump (metal). The time between each coat should be 2-3 hours depending on the air temperature. For maximum durability, two coats are sufficient. Note: When applying NANO CL PX-1000, always ensure good ventilation, and be sure to wear goggles, a mask, and gloves during the application process. MIXING RATIO: It is a ready-to-use product. It should not be mixed with any other materials. WATER MUST NOT BE ADDED UNDER ANY CIRCUMSTANCES.