The modified petroleum bitumen used in waterproofing by adding a first layer at the
foundation base.
It is a new-generation waterproofing membrane with high adhesion strength, covered with
high-strength, ultra-flexible SBS-added special mineral
stone, and featuring the cured structure of freshly poured concrete.
General Characteristics
No additional tape is required at corners and bends. It saves labor and
time. It has high resistance to puncturing. It bonds perfectly to freshly
poured concrete. It does not require protective concrete. It also provides
excavation savings
| Hydrostatic Pressure Resistance ( >110 m) | ASTM D5385 | psi (m) | >110 | Geçer |
|---|---|---|---|---|
| Water Vapor Permeability (0,123 kg/m2s.Pa) | ASTM E-96 | kg/m2s.Pa | 0.123 | 0.125 |
| Adhesion to Fresh Concrete (22 C;4200 N/m) | ASTM D903 | N/m | 4200 | 4300 |
| Vertical Adhesion (500 kPa) | ASTM D4541 | kPa | 500 | 1100 |
It is used in envelope waterproofing, basement floors, singleface formwork wall waterproofing, foundation retaining walls, and foundations
Protect from direct sunlight, store vertically; 12 months
It does not pose any special danger to humans and the environment. It does not contain asbestos or coal dust.
A rough concrete is poured onto the foundation base, smoothed with a trowel, and after it dries, the nanoproof is laid on the surface. The overlap is calculated as 10 cm. To increase the adhesion strength of the seams, it is heated with a torch and applied. It is then smoothed with a steel trowel