Bentonite-based geosynthetic clay liner.
It is a geosynthetic clay liner made of clay minerals with excellent swelling
properties, consisting of two geotextile layers based on geosynthetics and
a bentonite layer.
General Characteristics
It is environmentally friendly and does not harm the environment. It can
be applied on compacted base soil (does not require a gravel base). No
protective screed is needed after application. It saves time and does
not require a protective screed. Reinforcement can be directly attached
on top. It provides sealing up to 2 cm at punctured points. It offers
advantages in excavation.
| Unit Weight | ≥6000 | g/m2 | 9000 | EN ISO 9864 |
|---|---|---|---|---|
| Thickness | ≥6.0 | mm | 9000 | EN ISO9863-1 |
| Tensile Strength | ≥10 | KN/m | 9000 | EN ISO 10319 |
| Elongation at Break | ≥10 | KN/M | 9000 | EN ISO 10319 |
Wastewater treatment ponds and pools, foundations, and single-face walls.
Consumption: 1.10-1.15 m/m² Packaging: Width/Length: 2.5*30 m Quantity: 75 m² Store in a dry and clean place, on pallets, for 3 years.
During application and mixing, contact of the material with skin and eyes should be avoided. In case of contact, wash thoroughly with plenty of water. If the material comes into contact with the eyes, rinse immediately with plenty of water and seek medical help. Gloves, protective clothing, mask, and goggles should be worn during use.
It is applied by laying it on compacted soil and smooth gravel. The overlap at the seams is applied by calculating a 10 to 15 cm overlap. Nanobent cent sand is sprinkled on the seams, mechanically fixed, and nailed in place.