Elastomeric resin-based waterproofing material.
It is an elastomeric resin-based, ready-to-use, single-component, super-elastic liquid
plastic coating and waterproofing material.
General Characteristics
It is 600% elastic after drying, environmentally friendly, solvent-free,
has effective water vapor permeability, bridges cracks larger than 1
mm even at low temperatures while maintaining its elasticity, resistant
to temperature differences with its super-elastic structure, provides
seamless, monolithic waterproofing, can be painted over, has high
chalking resistance against water pooling, withstands light pedestrian
traffic, ready to use, and can be easily applied with a brush or roller.
| Color | Standard White, Gray, Red |
|---|---|
| Application Method | Brush, Roller, Airless Gun |
| Solid By Weight | % 60 |
| Density | 1,40 gr/cm³ |
| Consumption | 1,40 kg/m2 (2 kat / 1 mm) |
| Packaging | 20 kg |
| Shelf Life | 12 Months |
| Drying Time (Touch) | 3 - 4 Hours / at 25°C |
|---|---|
| Full Drying | 24 Hours |
| Equipment Cleaning | Cleaned with water |
| Elasticity | % 160 Mechanical |
| Strength | After 5 Days |
| Water Impermeability | After 7 Days |
It can be applied to raw concrete, screed, and plaster surfaces, asbestos cement and cement board, plasterboard (prime with AC 46 or TGF), metal, glass, wood, and similar surfaces.
20 kg Tin When stored at +10°C / +30°C in its original packaging in dry, protected and ventilated environments, protected from sun, rain and frost, the shelf life is 12 months from the date of manufacture.
During application and mixing, the material should be kept away from contact with skin and eyes. In case of contact, wash thoroughly with plenty of water. If it comes into contact with the eyes, rinse immediately with plenty of water and seek medical attention. Gloves, protective clothing, mask, and goggles should be worn during use.
Surface Preparation: Thick applications in a single coat should be avoided as they may negatively affect the curing time and performance of the product. The surface to be applied must be free from oil, dirt, rust, dust, and all other residues. Ensuring that the surface is solid and durable, and cleaning off dust residues by washing, positively impacts the product’s performance. Necessary repairs should be made before application, and the edges should be controlled using NANOREP FT Series repair mortar or edge tape. For the first coat primer, the product should be diluted with 50% water and applied in a thin layer of 0.300- 0.350 kg/m², based on the amount the surface absorbs. Subsequent coats should be applied without dilution, in a cross-hatched manner, at 0.600-0.700 kg/m². To ensure the longevity of the product, the surface should be protected from rain and frost for the first 48 hours after application.