UV - resistant elastomeric resin based waterproofing material.
Elastomeric resin-based, ready-to-use, single component, UV - resistant, super elastic
liquid plastic coating and waterproofing material.
General Characteristics
High resistance to UV rays. 600% elastic after drying. Environmentally
friendly, solvent-free. Effective water vapor permeability. Has a crack
bridging property of more than 1 mm even at low temperatures and
maintains its elasticity. Withstands temperature differences with its super
elastic structure. Provides seamless and monolithic waterproofing.
Paintable. High chalking resistance against water ponding. Resistant
to light pedestrian traffic.Ready to use, easily applicable with brush or
roller.
| Color | Standard White, Gray, Red |
|---|---|
| Application Method | Brush, Roller, Airless Gun |
| Solid By Weight | % 60 |
| Density | 1,40 gr/cm³ |
| Consumption | 1,40 kg/m2 (2 kat/ 1 mm) |
| Packaging | 20 kg |
| Shelf Life | 12 Months |
| Drying Time (Touch) | 3 - 4 Hours / at 25°C |
|---|---|
| Full Drying | 24 Hours |
| Equipment Cleaning | Cleaned with water |
| Elasticity | % 160 Mechanical |
| Strength | After 5 Days |
| Water Impermeability | After 7 Days |
Suitable for indoor and outdoor use of all structures. Used in waterproofing of concrete, plaster cement board, galvanized, zinc, aluminum, PVC, polyester, wood coated sloping roofs and terraces. On eaves, canals and canalettes, streams, gutters, parapets and chimney edges. In the waterproofing of the exterior facades of the buildings. In sub-ceramic waterproofing applications.
20 kg Tin When stored at +10°C / +30°C in its original packaging in dry, protected and ventilated environments, protected from sun, rain and frost, the shelf life is 12 months from the date of manufacture.
During application and mixing, the material should be prevented from contact with the skin and eyes, and it should be washed with plenty of water and in case of contact. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. Gloves, protective clothing / masks / goggles should be used during use
Surface Preparation: To avoid negatively affecting the drying time and performance of the product, thick applications should be avoided in a single layer. The surface to be applied should be cleaned of oil, dirt, rust, dust, and all kinds of residues. Ensuring the surface is solid and durable, and cleaning dust residue by washing will positively affect the product’s performance. Prior to application, necessary repairs should be made, and joints should be controlled with NANOREP FT Series repair mortar or joint tape. During the first coat primer application, the product should be diluted with 50% water and applied in a thin layer of 0.300-0.350 kg/m², depending on the surface’s absorption rate. Subsequent coats should be applied undiluted, at 0.600-0.700 kg/m², in a cross pattern. For the product’s longevity, the surface should be protected from rain and frost for the first 48 hours after application.