Polyurethane-based, two-component transparent topcoat waterproofing material.
It is a two-component, polyurethane-based, highly elastic, UV-resistant, non-discoloring
liquid topcoat protective coating material. It provides
excellent adhesion to various surfaces. Due to the strong film layer it forms, it offers
high mechanical and chemical durability. It is applied cold and
cures by reacting with the moisture in the air. It has high resistance to tension,
tearing, and abrasion.
General Characteristics
It is a cold-applied product that can be easily applied with a roller, trowel,
brush, or airless gun. It maintains its continuous flexibility. It can be applied
seamlessly. It is not affected by frost or standing water and maintains
its physical properties at -30ºC/+90ºC. It is water vapor permeable and
allows the surfaces to breathe. It has excellent adhesion properties. It
provides effective resistance to chemicals. After curing, it does not contain
toxic substances. It has high UV resistance and color stability.
| PROPERTY (23°C & 55 RH) | Unit | Method | Property |
|---|---|---|---|
| Color | - | ASTM D2196-86 | 100-800 |
| Viscosity (BROOKFIELD) | cP | ASTM D2196-86 | 100-800 |
| Specific Gravity | gr/cm3 | ASTM D1275 / DIN 53217 / ISO 2811 | 0.98 ± 0,05 |
| Solid Content | % | ASTM D2369 | 70-80 |
| Walkable Time | % | ASTM D412 | >650 |
| Re-coating | Hour | - | 8-12 |
| Hardness (7 Gün) | Shore A | ASTM D2240 / DIN 53505 / ISO R868 | 70-75 |
| Elongation at Break | % | DIN 5304 | >200 |
| Shelf Life | Months | - | 12 |
It is used for the protection of the following surfaces for waterproofing purposes. As a polyurethane or polyurea waterproofing protective topcoat material, it should be applied to metal surfaces such as iron, steel, and aluminum with an appropriate primer, and to construction materials such as concrete, stone, wood, and marble with an appropriate primer.
0.150 gr. - 0.200 gr/m² (in a single coat). Consumption may vary depending on the surface condition, environment, surface temperature, and application method. 5 kg bucket.
It is applied in two coats using a fine trowel, airless spray machines, brush, or roller. The prepared material is applied to saturate the surface and close the pores. The second coat should be applied within 8 - 24 hours (at 23°C). The material reaches its specified properties (at 23°C, 55% RH) in 7 days.