Pure polyurea-based waterproofing product
Nanopur 580 S is a two-component, flexible, high-reactivity, 100% pure polyurea spray
coating material formed by the reaction of isocyanate-based
prepolymer and a multifunctional amine mixture.
General Characteristics
• Fast curing.
• Can be applied on seamless and vertical surfaces.
• High mechanical strength.
• Chemical resistance.
• Corrosion resistance.
• Abrasion resistance.
• Environmentally friendly (VOC free)
| Density | 1.1-1.12 g/cm3 |
|---|---|
| Viscosity | 500-700 Cp |
| Total Solids Amount | 100% |
| Jelleşme Zamanı | 3-5 Sn |
| Time for Hand Adhesion | 13-15 Sn |
| Hardness | 90 - 100 Shore A |
| Tear Resistance | 30-55 N/mm |
|---|---|
| Elongation | 500-600 % |
| Rupture Strength | 10-15 N/mm2 |
| Mixing Ratio | 100/100 |
| Application Temperature | 70- 80 °C |
| Application Pressure | 120- 200 Bar |
• Roofs. • Terraces. • Industrial surfaces. • Roads. • Parking lots. • Pipes. • Commercial vehicle coatings. • Pools.
Component A 200 Kg, Component B 220 Kg Metal Drum Packaging It should be stored in its original packaging between +5°C and +30°C, in a dry environment and protected from frost. If appropriate storage conditions are met, it can be stored for 6 months from the date of production.
During application and mixing, the material should be prevented from contact with the skin and eyes, and it should be washed with plenty of water and in case of contact. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. Gloves, protective clothing / masks / goggles should be used during use.
The polyamine component should be mixed homogeneously with the B isocyanate prepolymer and applied using spray equipment capable of operating at high pressure and temperature. The surfaces to be applied must be free of residues such as dust, dirt, and oil that could prevent adhesion of the material. Areas exposed to external weather conditions should be painted with NP-PUR 850 aliphatic paint.