Moisture and humidity repellent paint.
It is a thermoplastic resin-based, solvent-based, single-component, very strong
insulation paint produced to eliminate moisture and humidity problems
on the interior and exterior walls of buildings.
General Characteristics
High resistance to alkali and moisture. It has strong adhesion, preventing
the formation of humidity and moisture on walls. It is resistant to
chemicals, saltwater, and UV rays, thus preventing issues such as paint
blistering caused by these factors.
| Coating Type | Thermoplastic resin-based, solvent-based |
|---|---|
| Relevant Standard | EN 1504-2 |
| Color | White |
| Thinner | Ready to use. Thinning is not recommended. Can be thinned with synthetic thinner if necessary |
| Density | 1,5 kg/lt ± 0.02 |
| Application Temperature | +5°C to +35°C |
| Theoretical Consumption | 0.5 - 0.6 kg/m² (for 2 coats) |
| Application Method | Roller, Brush |
|---|---|
| Touch Dry Time | 2-4 hours |
| Re-coating Time | 6-24 hours |
| Full Drying | 7 days |
| Shelf Life | 12 months, when stored in unopened original packaging at temperatures between +5°C and +35°C |
| Packaging | 1 kg and 2.5 kg tin cans |
It can be applied on the interior and exterior walls of buildings, surfaces and floors such as plaster, gypsum, concrete, screed, and in environments with high humidity and moisture levels, such as basements, garages, cellars, and pantries.
Repeated exposure may cause dryness and cracking on the skin. Keep away from heat / sparks / flames / hot surfaces. Avoid inhaling vapors / sprays. Avoid release into the environment. Use protective gloves / protective clothing / eye protection / face protection. IN CASE OF SKIN CONTACT: Wash with plenty of soap and water. IF SKIN IRRITATION OR ITCHING OCCURS: Seek medical advice / intervention. Store in a well-ventilated area. Keep cool. Keep out of reach of children.
The moisture paint is ready for use and should not be thinned. The surface to be painted can be damp, humid, or dry. It can be applied to both painted and unpainted surfaces. Excess water on newly plastered surfaces should be removed with a cloth. Dry surfaces should be lightly moistened. On old painted surfaces, areas with blistering should be cleaned and the surface should be free of dust. A solid surface should be achieved using an appropriate repair mortar. The product should be mixed thoroughly for 3-4 minutes after opening the original package. After mixing, the product should be applied to the surface using a brush or satin roller without dilution. After the first coat is applied, wait for 24 hours before applying the second coat. Proper ventilation of the application area is essential, and a mask, gloves, and protective goggles should be worn during application. During the application and the 24 hours following it, ensure that the ambient temperature is between +5°C and +35°C and that the area is protected from rain.