Felt-reinforced seam tape.
Made of polyester mesh and TPE, it is used for sealing cold joints and insulating
corners, which are the most critical points in wet areas.
General Characteristics
It is compatible with all coating-based insulation materials, so it does
not require an additional adhesive. It is easy to apply, has high elasticity,
provides 100% impermeability, is resistant to most chemicals, and has
good resistance to ozone and UV.
It is used in wet areas such as bathrooms, in structural joints in walls and floors, in water structures (wastewater treatment, drinking water, water tanks, swimming pools), at the junctions of reinforced concrete roof gutters, on terraces and parapets, and at roof terminations.
50-meter roll.
During application and mixing, contact with skin and eyes should be avoided. In case of contact, wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty of water and seek medical attention. During use, gloves, protective clothing, a mask, and safety goggles should be worn.
• Chemical Composition of the Material: TPE (Thermoplastic Elastomer) & Polyester Mesh • System Width: 120 mm • Service Temperature Range: -10ºC / +90ºC • Thickness: 0.60 mm • Water Pressure Resistance: 1.5 bar • Available Components: Inner corner and outer corner elements.