Polyurethane-bitumen-based, two-component joint filler paste.
It is a polyurethane-bitumen-based, two-component, cold-applied, self-leveling expansion
joint and crack filler paste
General Characteristics
It has high elasticity, maintaining its elasticity between -20°C and
+120°C. It is cold-applied, easy, and quick to use. It is resistant to
abrasion and aging. It has high mechanical and chemical resistance.
Its strength is high.
It is used in moving horizontal expansion joints, moving horizontal seams, for waterproofing and filling purposes.
A component + B component = 5 kg + 5 kg set Density: 1.30 kg/lt
The surfaces to be applied must be solid, dry, and clean. Dust, dirt, oil, and rust on the surface should be removed, and the edges of the joint should be cleaned with a wire brush, spiral motor, or sandblasting. If possible, compressed air should be used in the joint cavity. The surface must be dry. Components A and B should be mixed with a low-speed drill until a homogeneous appearance is achieved. The mixture should be used within approximately 30 minutes, otherwise, irreversible gelling will begin. It is only suitable for application on horizontal joints. The applied area should be protected from water for at least 6-8 hours.