Cement - Based, UV Resistant, Fully Elastic Waterproofing Mortar.
General Characteristics
• It is easy to prepare and apply.
• It is resistant to UV and light pedestrian traffic.
• Thanks to its full flexibility, it bridges shrinkage cracks.
• It has a long working time.
• It can be applied on damp surfaces.
• Ceramic can be applied on top.
| Appearance | Beyaz Toz, Beyaz Sıvı |
|---|---|
| Number of Coats | 2 – 3 |
| Application Thickness | 2 - 4 mm |
| Waiting Time | 5 – 6 saat |
| Container Life | 3 saat |
| Consumption | 1,3 – 1,5 kg/m2 |
| Adhesion Strength | ≥ 1,50 N/mm2 |
|---|---|
| Tensile Strength | ≥ 3,50 N/mm2 |
| Negative Water Pressure Resistance | 4 bar |
| Positive Water Pressure Resistance | 10 bar |
| Capillary Water Absorption | (kg.m-2.dk-0,5) ≤ 0,10 |
| Fire Reaction Class | Bs1d0 |
It is used as a topcoat waterproofing material resistant to UV and light pedestrian traffic in all types of buildings, both indoors and outdoors, in wet areas such as balconies, kitchens, toilets, bathrooms, foundation waterproofing, water tanks, swimming pools, and terrace roofs, in the direction of water flow.
Packaging: A: 20 kg Kraft B: 10 kg Drum Color: White It should be stored in a clean, dry, and moisture-free environment between +5°C and +35°C, protected from direct sunlight. It must be protected from water, freezing, and extreme weather conditions. It should be stacked up to a maximum of 10 layers. If the specified storage conditions are followed, the shelf life is up to 12 months from the production date.
During application and mixing, contact with skin and eyes should be avoided. In case of contact, rinse immediately with plenty of water. If the material comes into contact with the eyes, wash immediately with plenty of water and seek medical help. Protective gloves, clothing, masks, and goggles should be worn during use.
WHITE FLEX T 325’s B component should be gradually added to the A component and mixed with a low-speed mixer for about 2-3 minutes until a homogeneous consistency is achieved. After letting the mixture rest for 2 minutes, mix again for 30 seconds to make it ready for application. WHITE FLEX T 325 should be applied to the entire surface in at least two coats using a brush or spraying method. If applying with a brush, each coat should be applied in a direction perpendicular to the previous one. Mesh reinforcement should be applied immediately after the first coat. A minimum of 5 hours should be allowed between coats. The surface should be clean, damp, smooth, and solid. Significant imperfections and holes on the surface should be repaired with NANOREP FT–70/30 series repair mortar at least 24 hours before applying WHITE FLEX T 325. To ensure the continuity of waterproofing, vertical and horizontal corners should be beveled. Surfaces such as rough concrete or cement-based plaster should be wetted with clean water and allowed to stay damp until the water layer evaporates. For porous surfaces, WHITE FLEX T 325 should be used as a primer to balance the water absorption of the surface.