Polymer emulsion modified, cement and acrylic based, UV-resistant, dual component super
elastic waterproofing product.
General Characteristics
It is easy to prepare and apply. Thanks to its high flexibility, it bridges
cracks. It provides fast and comfortable application on large surfaces. It
has high durability. It is resistant to UV and frost in outdoor conditions. It
has a long working time. It provides high adhesion to the surface.
| Color | Beyaz |
|---|---|
| Density | 2,00 ± 0,05 g/cm³ |
| Service Temperature | +-20°C ile +80°C |
| Application Temperature | +5°C ile +25°C |
| After Thermal Aging | ≥ 1,00 N/mm2 |
| CO2 Permeability | Sd > 50 m |
| Capillary Water Absorption | ≤ 0,10 kg.m-2.dk-0,50 |
|---|---|
| Crack Bridging | ≥ 0,75 mm |
| Adhesion Strength | ≥ 1,00 N/mm2 |
| Consumption | 1,5 - 2,0 kg/m2 (1 mm kalınlık için) |
| Full Drying | 7 Gün |
| Reaction To Fire Class | Bs1d0 |
It is used as a waterproofing material in all structures, both indoors and outdoors, in wet areas such as balconies, kitchens, toilets, and bathrooms, in foundation wall insulation requiring high performance, in vibrating areas, and in water tanks. Thanks to its super elastic structure, it has a high crack-bridging ability. It can be safely applied on large terraces.
Packaging A: 20 kg Kraft B: 10 kg Canister Color: White It should be stored in a clean, dry, and moisture-free environment at temperatures between +5°C and +35°C, away from direct sunlight. It must be protected from water, frost, and severe weather conditions. It should be stacked no more than 10 layers high. Provided that the specified storage conditions are met, the storage life is a maximum of 12 months from the production date.
During application and mixing, the material should be prevented from contact with the skin and eyes, and it should be washed with plenty of water and in case of contact. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. Gloves, protective clothing / masks / goggles should be used during use.
The surface should be clean, damp, smooth, and solid. Significant imperfections and holes on the surface should be repaired using SUPER adhesion. FLEX 325 UV should be applied after at least 24 hours of repair with NANOREP FT - 70/30 series repair mortar. To ensure the continuity of the waterproofing, vertical and horizontal corners should be chamfered. Surfaces such as raw concrete and cement-based plaster should be moistened with clean water, and the surface should remain damp until the water layer evaporates. Porous surfaces should be primed with one coat of SUPERFLEX 325 UV to balance the surface’s water absorption.