Epoxy / tar-based waterproofing product.
It is an epoxy, tar-based coating and insulation membrane. It is applied to metal and
concrete surfaces. It provides excellent waterproofing to the
surface it covers. It protects foundation and shear walls from corrosion in soil and
underwater conditions.
General Characteristics
It provides excellent water insulation due to its perfect adhesion to the
applied surface. It does not separate or peel off from the surface. It is
elastic and can even be applied to damp surfaces. The long pot life
duration offers great ease of use.
| Number of Components | 2 |
|---|---|
| Mixing Ratio (by weight) | A/B (92/8) |
| Mixing Density (g/cm³, 20°C) (TS EN ISO 2811-1) | 1,473 ± 0,10 |
| Mixing Life (dak, 23°C, 100ml) (DIN 16945) | 4-7 |
| Mixing Viscosity (mPas, 25°C) (EN ISO 3219) | 1500 - 2500 |
|---|---|
| Touch Dry (Hours) | 24-36 |
| Full Cure (Week) | 1 |
It is used for protection and water insulation purposes on materials such as metal, concrete, wood, etc.
At a consumption rate of 1450 g/m² per coat, a thickness of 1 mm is achieved. The recommended thickness varies depending on the mechanical strength required for the application. Total Net: 20 kg (A: 18.40 kg / B: 1.60 kg)
The mixture or components should be avoided from coming into contact with the skin and eyes. In case of contact, wash immediately with plenty of water and seek medical advice. Protective gloves, clothing, and goggles should be worn, and the product should be kept out of reach of children.
Component B should be fully poured into component A and mixed for at least 3 minutes until a homogeneous mixture is formed. To prevent the formation of air bubbles in the mixture, it is recommended to mix at a low speed.