Polymer modified, bitumen - rubber based single component waterproofing material.
Genel Özellikleri
• Can be used on all mineral-based surfaces and has high adherence.
• Applied only from the positive side.
• Resistant to saline solutions and weak acids.
• Resistant to the freeze-thaw cycle.
• Forms a monolithic, seamless insulation layer.
• Easy to apply with brush and trowel.
• Solvent-free and environmentally friendly.
| Color | Brown (Dry Black) |
|---|---|
| Application | Brush, roller, spray |
| Solid Content | 70%± 0.02 |
| Density | 1,20 kg/lt 1,05-1,10 kg/lt |
| Application Temperature | +5°C +35°C |
| Usage Time | 1-2 Hour |
| First Drying | 4-5 Hour |
| Full Drying | 1-3 day |
|---|---|
| Waterproofing | W2A |
| Water Resistance | R2 |
| Crack Bridging | CB2 |
| Breaking Elongation | ≥300% |
| Fire Reaction Class | E |
• In the waterproofing of foundation curtain walls, • In the waterproofing of sloped concrete, • In the foundation bundling applications, • In the waterproofing of underground building elements, • In the renovation of bitumen-based synthetic covers,
18 kg PP Bucket. It should be stored in its original packaging in a dry environment between +5°C and +35°C. It has a shelf life of at least 12 months in a dry, cool and closed place in its unopened packaging.
During application and mixing, the material should be prevented from contact with the skin and eyes, and it should be washed with plenty of water and in case of contact. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. Gloves, protective clothing / masks / goggles should be used during use.
The application surface should be solid, dry, clean, free of loose parts. Deep gaps on the surface should be covered with repair mortar. Internal corners and joints of the walls should be chamfered. The application surface should be primed with solvent-free bitumen primer and the application should be started after the primer is completely dried. The product can be primed by diluting at the rates of 1/1 and 1/4. The material should be dispersed evenly with a suitable brush and applied without allowing material accumulation on horizontal surfaces. The primer should be allowed to dry and then proceed to the actual application. It is recommended to use a rate of 0.4 kg/m² as primer. It should be applied to the prepared surface in at least 2 coats with a brush, trowel or spray. After the application of the first coat, complete drying must be achieved before applying the second coat. The second coat should be applied perpendicular to the first coat.