Epoxy Acrylate-Based Chemical Anchor
A two-component epoxy acrylate-based chemical anchor
General Characteristics
Can be applied to damp surfaces. Cures quickly. Easy to apply. High
resistance to chemicals. Maintains its color.
| Full Cure (at 20°C) | 7 Days |
|---|---|
| Application Temperature | +5oC - (+) 35oC |
| Service Temperature | 0oC - (+) 100oC |
| Heat Resistance (Kürleşme) | -30oC - (+) 100oC |
| Density A. Komp. | 1,65 ± 0,03 kg/cm3 |
|---|---|
| Density B Komp. | 1,3 ± 0,03 kg/cm3 |
| Color | Hardener - Dark Gray / Resin - Beige |
| Appearance | Paste Consistency |
410 ml (a+b) Box quantity: 12 pieces. The product should be stored in its sealed packaging and kept away from direct sunlight. It has a shelf life of 12 months when stored under proper conditions at a temperature between +5°C and +25°C.
Care should be taken to avoid skin contact. Avoid eye contact. Proper ventilation conditions should be ensured, and the vapors should not be inhaled. Smoking should be avoided during product use.
Anchoring operations can be performed on surfaces such as concrete, marble, hollow brick, and stone. A hole is drilled in the area where reinforcement will be applied, using a drill bit suitable for the diameter. The drilled hole is cleaned with compressed air or a suitable brush to remove dust and dirt. The cartridge cap is opened, the clip is held, and the foil is cut. The mixing cannula is placed at the mouth of the cartridge. The cartridge is then placed into the gun, and the product is dispensed for about 10-15 cm until a uniform gray color is achieved. The hole is filled up to 2/3 of its depth. The anchoring material is gently rotated and placed. After the curing process is complete, it can be put into service.