It is an acrylic dispersion-based primer that enhances adhesion and provides water
impermeability for screeds, plasters, and concrete
additives.
It is an adhesion-enhancing primer and water impermeability agent for screeds, plasters,
and concrete additives.
General Characteristics
• Creates a strong and lasting bond.
• Reduces surface absorbency when applied to absorbent surfaces.
• Provides excellent adherence and elasticity.
• Provides high resistance to oil and salt solutions.
• Dries without cracks and is resistant to abrasion.
• Does not cause corrosion and saponification.
• Increases chlorine impermeability. Provides water impermeability
| Color | White |
|---|---|
| Density | 1,05 g/cm3 |
| Pot Life | 55 Minutes |
| Drying Time | 135 Minutes (Every temperature suitable for concrete pouring) |
Used as an adherence additive in mortars prepared for the repair of damaged concrete surfaces, screeds and plasters, As a primer under the self-spreading screeds, As an additive for increasing the water impermeability of reinforced concrete silos, water tanks, pools, internal and external plaster of treatment plants, To prevent dusting and cracking in screeds, In the preparation of spreading plaster to increase adherence before plaster and ceramic applications on smooth concrete surfaces. Used to ensure the adherence of new concrete and old concrete.
5 kg / 30 kg Plastic Bucket Should be stored in its original unopened packaging, in a cool and dry environment, protected from frost. Suitable storage temperature should be between +5°C and +25°C. Shelf life is 12 months from date of manufacture under appropriate storage conditions.
During application and mixing, the material should be prevented from contact with the skin and eyes, and it should be washed with plenty of water and in case of contact. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. Gloves, protective clothing / masks / goggles should be used during use.
In plaster mortars: 1m³ of washed river sand is mixed with 350 kg of cement. A mixture of 120 kg of water and 5 kg of NS LATEX is added to the dry mix. It is applied with a trowel. In screed application: 1m³ of washed river sand is mixed with 350 kg of cement. A mixture of 110 kg of water and 4 kg of NS LATEX is added to the dry mix. The mixture is applied over the primer layer. In topping mortars: 1m³ of aggregate is mixed with 250 kg of cement and 3 kg of NS LATEX, then water is added until a paste-like consistency is achieved. The mortar with additives is applied to the floor covering materials and left to dry. In spreading mortars: 1m³ of washed river sand is mixed with 350 kg of cement and 10 kg of NS LATEX, and water is added until a pastelike consistency is reached. After application with a spreading tool, the mixture is left to dry. After 24 hours, the surface can be walked on. The final curing of the concrete is completed in 28 days.