Two-component, epoxy-based, moisture-tolerant primer.
It is a primer and penetration material for concrete and cement-based mineral surfaces.
It is used as a primer for epoxy, polyurethane, and polyurea
flooring applications.
General Characteristics
It does not contain solvents. It has low viscosity and is easy to apply.
It prevents dusting on the surface where it is applied. It is resistant to
cold greases and mechanical oils used in repair and maintenance work.
It penetrates the capillary spaces in concrete structures and blocks
the voids. Thanks to its surface tolerance properties, it can be applied
to damp surfaces. It provides excellent penetration and adhesion to
cement-based surfaces. It is used as a primer and binder in concrete
repairs to impregnate concrete surfaces and protect them against wear,
dusting, and chemicals under all types of epoxy and polyurethane
coatings.
| Component Count | 2 |
|---|---|
| Mixing Ratio (by weight) | A/B (70/30) |
| Mixing Density (g/cm3, 20°C) (TS EN ISO 2811-1) | 1,08 ± 0,10 |
| Mixing Life (min., 23°C, 100ml) (DIN 16945) | 30-55 |
| Mixing Viscosity (mPas, 25°C) (EN ISO 3219) | 300-500 |
| Touch Dry (Hours) | 10 - 12 |
|---|---|
| Full Cure (Week) | 1 |
| Layer Acceptance (Hours) | 2 - 4 |
It is used as a primer on concrete and screed surfaces. It is used under epoxy flooring products. It is used as a primer under polyurethane flooring products. It is used as a primer under polyurethane waterproofing products. It is used as a primer under polyurea waterproofing products. It is used as a primer under hybrid-based polyurethanes.
The consumption depends on the surface to be applied. Total Net: 16kg (A: 12kg / B: 4kg). In unopened, original packaging, stored in a dry, enclosed area away from direct sunlight, at temperatures between 15°C and 25°C; 1 year.
Avoid contact of the mixture or components with skin and eyes. In case of contact, rinse thoroughly with water and seek medical attention. Protective gloves, clothing, and goggles should be worn, and the product should be kept out of reach of children.
The surface to be applied must be free from oil, rust, dust, and other impurities. There should be no loose layers on the surface. Shiny surfaces should be roughened with shot-blasting, slim, or freeze methods. Apply the Epoxy Moisture Barrier NANOPOX WET 2C PR to the prepared surface using a brush or roller. Any cracks or holes on the surface should be repaired using epoxy paste. Subsequent epoxy, polyurethane, and/or polyurea applications can be performed on the primed surface.