Cement-based, single-component, ready-to-use machine plaster.
Cement-based, single-component, chemically enhanced, fiber-reinforced ready-to-use fine
plaster that can be applied by machine or manually
General Characteristics
It is fiber-reinforced and contains polymers, providing water resistance.
It adheres excellently and is easy to apply. It does not crack, is flexible,
has the appearance of plaster, is paintable, and has a long working
time.
| Physical Appearance | Grey |
|---|---|
| Density | 1325 gr/lt |
| Water Mixing Ratio | 4,5-5 lt / 25 kg toz. |
| Air Content | %20 |
| Compressive Strength | ≥ 4 N/mm² |
| Bond Strength | ≥ 0,5 N/mm² |
| Fire Class | A1 |
It is used in interior and exterior spaces, on wall and ceiling surfaces, to achieve a smooth surface before satin and decorative coatings on surfaces such as concrete and exposed concrete.
It should be stored in its unopened original packaging, in a cool and dry environment, protected from frost. The recommended storage temperature is between +5°C and +25°C. The shelf life is 12 months from the production date under proper storage conditions.
During application and mixing, contact with skin and eyes should be avoided. In case of contact, wash immediately with plenty of water. In case of eye contact, rinse with plenty of water and seek medical attention. Gloves, protective clothing, a mask, and safety glasses should be worn during use.
Absorbent surfaces such as aerated concrete and Ytong should be primed with the AKR Series. If it will also be used as ceiling plaster, shiny concrete surfaces must be primed with AKR BRUT. The appropriate amount of water is poured into a clean mixing container using a measuring scale. SV YAPMATIK is slowly added and mixed with a low-speed mixer for 3 - 5 minutes until a homogeneous mixture is obtained. After resting, the mixture is stirred again for 20-30 seconds, and the material is ready for use.