Two-component low-اللزوجة epoxy-based injection resin.
It is a two-component, epoxy-based, non-filling, low-اللزوجة resin with high
mechanical المتانة. Due to its excellent diffusion properties, it fills cracks
and fractures in structural elements where it is injected.
الخصائص العامة
Thanks to its low اللزوجة, it provides excellent diffusion into structures.
Without losing volume, it fills the cracks it is injected into and ensures
adhesion. It can be injected into damp concrete.
| الجاذبية النوعية | 1.10 kg/lt (A+B) |
|---|---|
| اللون | Transparent |
| اللزوجة | 200-300 MPa.s |
| درجة حرارة االستخدام | +5°C / +35°C |
| نقطة الوميض | +65°C |
| االلتصاق بالخرسانة | 2 N/mm2 (28 اليومs, 20°C) |
|---|---|
| قوة الضغط | 65 N/mm2 (7 اليومs, 20°C) |
| قوة االنثناء | 25 N/mm2 (7 اليومs, 20°C) |
| The above values are provided for +20°C and 50% relative humidity. |
It is used to المتانةen structures by filling static cracks in damaged concrete, columns, beams, walls, and similar structural elements, as well as in reinforced concrete, stone, and solid brick constructions.
The product has a مدة الصالحية مدة الصالحية of 1 year from the production date when stored in its original التغليف in ventilated, dry, and protected environments, between +5°C and +25°C, shielded from sunlight, rain, and freezing conditions.
During التطبيق and mixing, contact with skin and eyes should be avoided. In case of contact, wash thoroughly with water. If the material comes into contact with the eyes, rinse immediately with plenty of water and seek medical attention. Protective gloves, clothing, a mask, and goggles should be worn during use.
Surface Preparation: Cracks that have reached the surface should be widened to approximately 5-10 mm in width and 10-12 mm in depth, creating an inverted cone shape along the crack. Dust, dirt, and other debris should be removed using compressed air. التطبيق: Packers are inserted into the drilled holes, allowing the NANOPOX IN 125 epoxy resin to be injected into the cracks in the concrete, ensuring thorough filling. The packers are placed into the drilled holes, and the NANOPOX IN 125 resin is injected through the nozzles using an injection pump. The injection process should be performed with specialized pumps (either single-head or dual-head). For quick التطبيق, a single-head pump should be used; otherwise, a dual-head pump should be employed. The working pressure should not exceed 5 bar. Typically, once injection begins from one packer, the process should continue until the resin reaches the nearest packer(s). The NANOPOX IN 125 epoxy resin advances due to its own capillary pressure, rather than being forced through increased pump pressure in capillary channels.