المواصفات الفنية

مجالات الاستخدام

• Concrete, • Plaster, • Plaster surfaces, • Wood, etc. • Glass, • Metal, • Marble Granite surfaces

التعبئة والتخزين

12Kg Component A, 6Kg Component B should be stored in its unopened original التغليف in a cool, dry environment, protected from freezing. The suitable storage temperature should be between +5°C and +25°C. The مدة الصالحية مدة الصالحية is 12 months from the production date under proper storage conditions.

توصيات السلامة

During التطبيق and mixing, contact of the material with skin and eyes should be prevented. In case of contact, rinse immediately with plenty of water. If it contacts the eyes, rinse immediately with plenty of water and seek medical assistance. During use, gloves, protective clothing, mask, and goggles should be worn.

طريقة التطبيق

Surface Preparation: The concrete surfaces to be applied must be dry, clean, and dust-free. Damaged and loose concrete pieces must be removed from the surface. The surface must have a minimum قوة الضغط of 25 N/mm² and a minimum pull-off adhesion المتانة of 1.5 N/mm², according to test results. New concrete must be at least 28 اليومs old depending on the season. Large cracks and defects must be repaired in advance. The cement skin and smooth screed on the concrete surface must be cleaned and roughened with tools such as sandblasting, notching machine, diamond drum جريnding machine, or power جريnding, and the surface must be wiped clean. The entire surface must be free from dust. Mixing: NANOPUR WET 2C is supplied in ready-to-use sets according to the نسبة الخلط. It is a two-component product, and it should be prepared in the specified نسبة الخلط in the amount to be consumed, taking into account the عمر الوعاء . The product temperature should not be less than 15°C to obtain a homogeneous mixture. Component A should be quickly mixed with a mechanical mixer, and the hardener (Component B) should be added, paying attention to the نسبة الخلط. Components A and B should be mixed for at least 1-2 الدقائق with a mixer operating at about 300 revolutions per minute, using an appropriate mixing tip, ensuring that no unmixed material remains on the edges and bottom of the التغليف, until a homogeneous mixture is obtained and ready for use. التطبيق: The prepared mixture should be applied with a roller or airless spray, ensuring that the surface is saturated and the pores are sealed. The minimum time for re-coating is 4 ساعات (at 20°C) and the maximum is 24 ساعات. If the re-coating time exceeds 24 ساعات, the primer surface must be sanded before applying the next coat. It is crucial to apply the second coat within the specified إعادة الطالء إعادة الطالء. Full mechanical and المقاومة الكيميائية is achieved after approximately 7 اليومs. التطبيق Conditions: The relative humidity of the air should not exceed 90%, and the التطبيق temperature (ambient and surface) should be between +5°C and +30°C. In outdoor areas, weather conditions should be checked so that it is not rainy 24 ساعات before starting the التطبيق, during the التطبيق, and 24 ساعات after the التطبيق.